Send Your Project
Menu
SHLED · FACADE LIGHTING SOLUTIONS
E18 Installation & Wiring Guide
This guide restructures the installation and connection information in SHLED's E18 technical manual into a project-oriented workflow for facade contractors and system integrators.
Installation hardware
| Component | Function |
|---|---|
| M3 U-lock | Locks and fixes the wire rope |
| M4 wire-rope tensioner | Tensions and straightens the mesh |
| Factory-fitted clips | Position LED strips on the wire-rope grid |
| M16F extension cable | Connects equipment to the first LED segment |
| Shielded CAT5e | Network / controller connection |
Recommended installation sequence
Control and wiring
Online playback
Networked control is used where media content is centrally managed or updated through the main control system.
Offline playback
Local playback can support simpler installations or projects that need autonomous operation.
Breakpoint resume
Fault-tolerant transmission helps prevent one isolated pixel failure from interrupting all downstream pixels.
Power zoning
Large facades should be divided into manageable electrical zones with clear cable and service access.
Before installation starts
Confirm facade dimensions, wire-rope anchoring, panel orientation, control-box locations, cable lengths, network routing and maintenance access before the first mesh section is installed.
E18 Technical Manual
Control Architecture
The installation should be treated as a repeatable system: structure, tension, cable routing, addressing and control zones all need to be documented before field work begins.